Applications

Events

02/03. Sept. 2010
Kranfachtagung
Bochum/GER

26.-29. Sept. 2010
ZES World
San Francisco/USA

07.-08. Oct. 2010
Conference
Bulk Material Handling
Garching/GER

11.-12. Nov. 2010
Stahl 2010
Düsseldorf/GER

Downloads

LPR Anti-Collision Sensors for Cranes

HallenkraneOften, bridge or tower cranes are working im overlapping areas. Crane operators must concentrate on the load and have to be warned automatically when a potential collision situation is detected.Turmdrehkrane

Sensors for collision avoidance are indispensable to protect persons and assets. If persons could be injured in case of a collision, redundant and fail- safe distance measurement as well as signal processing in accordance with the corresponding safety regulations is a must.

Symeo LPR: maintenance-free anti-collision sensors

Two LPR-1DXi or LPR-1DX units are required for distance measurement. In case of a neccessary redundancy, this set-up is just duplicated. Each pair of LPR units determines the distance completely independent and unaffected from the other. With a selection of suitable antennas, the distance can be determined exactly even if the 2 objects are not operating on the same height level and / or with a side offset.

LPR Antikollisonssensorik für Krane


Symeo datasheet: LPR-1DXi, LPR-1DX

If certain areas below the crane should be temporaryly or permanently blocked for crane access, LPR-1DP2 is applied to continuously monitor the trolley position. The size of the no-go areas can be set by user parameters. Approaching such an area, first the warning relay (dry contact) will be opened as a slow down signal. Upon reaching the hard border of the stop zone,  a further relay will be opened to indicate the stop signal for the respective driving direction.

LPR-1DP2 no-go areas

Symeo data sheet: LPR-1DP2

 

For more complex crane layouts with sveral cranes on one or more layers, LPR-1D sensors can be combined with the monitoring and control software Symeo AntiColl. The position of all cranes are continuously monitored and AntiColl transfers this data to all connected LPR devices. Each LPR unit on a crane will open respective relay contacts to slow down or stop, depending on warning and stop distances set by the user.

Symeo AntiColl

Symeo datasheet: Symeo AntiColl Software

new product 2010:

Symeo AntiColl for combined collision avoidance of cranes, vehicles and any other moving or fixed objects:

Symeo anticollision free ranging objects

 

Preliminary datasheet: Symeo anticollision for free ranging objects 

Measurement with LPR sensors is contact-free with no wear and tear. Even under dusty conditions and in outdoor applications, LPR operates completey maintenance free.